Engine is under construction, performance is expected to be similar to Skyline.
First spy photo from the test track - quite a hard moment anyway. :D
Far from ready, but it already hides an eastern egg... ;)
Btw are you okay with the more realistic height values? The built in cars are way too low (~1/5 of the length or even less) - Impreza will be 100 units long with 31 units height.
Quote from: CTG on November 12, 2012, 01:50:18 PM
Btw are you okay with the more realistic height values? The built in cars are way too low (~1/5 of the length or even less) - Impreza will be 100 units long with 31 units height.
I do not recommend that. Stunts stretches 3D models and bitmaps vertically by a factor of 6:5 (an explanation (http://wiki.stunts.hu/index.php/Aspect_ratio) and some evidence (http://forum.stunts.hu/index.php?topic=1137.msg41964#msg41964)). To compensate for that, stressed models should have their height reduced by 1/6. Incidentally, I committed this mistake with the original release of Skyline, and it looked like a truck next to the other cars. (Also, that's why if you check the readme of Skyline in the current ZakStunts pack you'll find it is actually the 1.1 version...)
P.S.: If you are using the latest Windows release of stressed (the 0.1.0-rc5 in this post (http://forum.stunts.hu/index.php?topic=2224.0)) the rescaling of the y-axis should be done automatically for 3D models, so the car should look right with the height corrected by the 5/6 factor.
Somehow the original cars seem to be too flat, that's why I made such a tall one.
must be fun when the tunnel comes right after the slope of the mountain :)
Quote from: CTG on November 12, 2012, 12:53:17 AM
First spy photo from the test track - quite a hard moment anyway. :D
lol, another plane ?!
By the way, promising Subaru car :D
Quote from: Krys TOFF on November 18, 2012, 11:19:39 PM
lol, another plane ?!
I have 8 airplanes at the moment.
Edit #1: AN-225, B748, A380, MD11, Concorde, RJ85, AN-2, Zeppelin...
Quote from: CTG on November 18, 2012, 11:23:00 PM
I have 8 airplanes at the moment.
I hope one of them is named Jefferson, with a big "revolution" word as shape on it.
Yes, yes, I know, only dinosaurs like me still remind Jefferson Airplane (re-named Jefferson Starship a few years later) band. ;) ;D
Give a nice handling to this car. :)
Quote from: Friker on November 20, 2012, 01:28:41 AM
Give a nice handling to this car. :)
It already has. :D
(quite good cornering, acceptable grip on ice/mud/grass, acceleration is slightly better than Corvette's, top speed is somewhere around 180-185 mph - it's a hybrid of the rally car and the tuned street drag version)
The new version has a decreased height (the roof is still at Y=25 or 26) and it really looks better.
Are you okay with digital speedometer? (Digital rev meter would be cool, but unfortunately it's impossible - I really miss it from the Knight Rider project).
Quote from: CTG on December 15, 2012, 10:43:14 AM
Are you okay with digital speedometer?
Why, sure I am :)
Quote from: CTG on December 15, 2012, 10:43:14 AM
Are you okay with digital speedometer?
I'm ok with it. Not with digital rev meter though. I like my revs with a needle
Ouch, I just discovered that zapper already used the rev meter style I planned for the street race version of Subaru... :-\
So that's the point where I stop this "30% ready" design and try to find out a new one.
(btw all the stupid street pipsqueaks drink tons of energy drink)
Self-reminder... for Gangnam maybe.
It's so hard to make a decent dashboard... :-\
Quote from: CTG on July 27, 2013, 05:17:59 PM
It's so hard to make a decent dashboard... :-\
I give up. It will inherit Corvette's steering wheel (with slight modifications). :D
What a such good car. It is released? ;D
<._.>..... (good job)
Can i atleast see a image of it?
Quote from: Vector on March 01, 2015, 05:56:34 PM
<._.>..... (good job)
Can i atleast see a image of it?
See the previous posts and/or http://wiki.stunts.hu/index.php?title=Subaru_Impreza_WRC
Maybe some idea of dashboard
Or if somebody succeed to make it more dark.
Last one.
It would be cool too see it finally released.
Did @CTG kept the shape ? If yes after the Ferrari 308 GT Rainbow, I will try.
Quote from: Ryoma on March 13, 2022, 07:50:13 PM
Did @CTG kept the shape ? If yes after the Ferrari 308 GT Rainbow, I will try.
Sure. But the car is way too high, I screwed up the ratio... ::)
Car1 is ready with 7 paintworks (with a street version as seventh), Car0 / Car2 and Exp models are not. I've also attached the CARSWRC.RES (with digital speedometer setup...).
Feel free to modify it - both the 3D model ratios and the performance. The only thing I insist is the paint-job (you can add further colors if you want, but please keep the current seven versions).
Ok thanks, I will modify only the dimensions (What's wrong with the dimensions ???).
Here another example of dashboard.
Quote from: Ryoma on March 14, 2022, 09:31:39 AM
Ok thanks, I will modify only the dimensions (What's wrong with the dimensions ???).
Here another example of dashboard.
Nice.
I try quickly the shape but I found only 7 times the same paint job....
The dimension are 2000 x 800 x 520, I will change closed to the value of the Quattro and Delta
Quote from: Ryoma on March 14, 2022, 10:06:43 AM
I try quickly the shape but I found only 7 times the same paint job....
The dimension are 2000 x 800 x 520, I will change near to the value of the Quattro and Delta
Because the paint-jobs were completed only in Car1, but not in Car0 and Car2. :(
OK!!!!!!! I need to learn to read before making car...
First trial, what is your opinion ?
Quote from: CTG on March 14, 2022, 10:30:21 AM
Quote from: Ryoma on March 14, 2022, 10:06:43 AM
I try quickly the shape but I found only 7 times the same paint job....
The dimension are 2000 x 800 x 520, I will change near to the value of the Quattro and Delta
Because the paint-jobs were completed only in Car1, but not in Car0 and Car2. :(
It's easy to copy with carworks now. Just ctrl-c and ctrl-v to car1 and car2. Size and paint jobs are automatically adjusted.
look my post above....
WIP
Here the files with the cars and the benchmark.
Quote from: Daniel3D on March 14, 2022, 12:45:59 PM
Quote from: CTG on March 14, 2022, 10:30:21 AM
Quote from: Ryoma on March 14, 2022, 10:06:43 AM
I try quickly the shape but I found only 7 times the same paint job....
The dimension are 2000 x 800 x 520, I will change near to the value of the Quattro and Delta
Because the paint-jobs were completed only in Car1, but not in Car0 and Car2. :(
It's easy to copy with carworks now. Just ctrl-c and ctrl-v to car1 and car2. Size and paint jobs are automatically adjusted.
Thanks! However, this car was originally made in 2012 - since that I haven't touched these files. And I guess I won't ever build a new car.
Did someone test the car ???
Two posts above....
Not working... (wrong STDB file or just wrong name)
STDBRAIN was attached.
The top of windscreen would be cool in this style.
(https://www.hlj.com/media/catalog/product/cache/acedba8d3f43cedb2fbb4f1aa3b47451/h/s/hsgch51_0.png)
I know that it was a lot more difficult in the past.
I knew that CAS was working on the feature about 6 months before it's release, I postponed all ideas then.
(To bad, because I had time for it back then)
Quote from: CTG on March 14, 2022, 07:14:00 PM
Not working... (wrong STDB file or just wrong name)
STDBRAIN was attached.
The top of windscreen would be cool in this style.
Oups confusion with the Rainbow.
Here the files :
https://mega.nz/folder/N7ACECKD#tg6wDPqar9DG39rt4TqyEg
For the top-windscreen, you mean for the dashboard or the shape ?
I mean the STDA file, roof (e.g. with SUBARU instead of REPSOL).
Ok I will take a look tomorrow for this sunshield.
If you find an example, you can shared it here.
something like that ?
It looks great, thank you.
Cool, you are welcome.
Here the files.
Quote from: Vector on March 01, 2015, 05:53:18 PM
What a such good car. It is released? ;D
Yes lol
Dashboard improvment
Wow. Impressive work again Ryoma.
Very nice concept and model as well CTG 8)
There is a Subaru Impreza in Ultimate Stunts, characterized by possessing the same acceleration and maximum speed on grass as on asphalt...
Quote from: afullo on March 17, 2022, 12:26:23 AM
There is a Subaru Impreza in Ultimate Stunts, characterized by possessing the same acceleration and maximum speed on grass as on asphalt...
I liked the project, but car handling feels way off.
Quote from: Daniel3D on March 17, 2022, 09:50:29 AM
Quote from: afullo on March 17, 2022, 12:26:23 AM
There is a Subaru Impreza in Ultimate Stunts, characterized by possessing the same acceleration and maximum speed on grass as on asphalt...
I liked the project, but car handling feels way off.
Of course a car behaving exactly the same way on both grounds is a coarse simplification...