Subaru Impreza WRC

[Ryoma]

I try quickly the shape but I found only 7 times the same paint job....

The dimension are 2000 x 800 x 520, I will change closed to the value of the Quattro and Delta

[CTG]

I try quickly the shape but I found only 7 times the same paint job....

The dimension are 2000 x 800 x 520, I will change near to the value of the Quattro and Delta

Because the paint-jobs were completed only in Car1, but not in Car0 and Car2.

[Ryoma]

OK!!!!!!! I need to learn to read before making car...

[Ryoma]

First trial, what is your opinion ?

[Daniel3D]

I try quickly the shape but I found only 7 times the same paint job....

The dimension are 2000 x 800 x 520, I will change near to the value of the Quattro and Delta

Because the paint-jobs were completed only in Car1, but not in Car0 and Car2.

It's easy to copy with carworks now. Just ctrl-c and ctrl-v to car1 and car2.  Size and paint jobs are automatically adjusted.

[Ryoma]

look my post above....

[Ryoma]

WIP

[Ryoma]

Here the files with the cars and the benchmark.

[CTG]

I try quickly the shape but I found only 7 times the same paint job....

The dimension are 2000 x 800 x 520, I will change near to the value of the Quattro and Delta

Because the paint-jobs were completed only in Car1, but not in Car0 and Car2.

It's easy to copy with carworks now. Just ctrl-c and ctrl-v to car1 and car2.  Size and paint jobs are automatically adjusted.

Thanks! However, this car was originally made in 2012 - since that I haven't touched these files. And I guess I won't ever build a new car.

[Ryoma]

Did someone test the car

Two posts above....

[CTG]

Not working... (wrong STDB file or just wrong name)

STDBRAIN was attached.

The top of windscreen would be cool in this style.

[Daniel3D]

I know that it was a lot more difficult in the past.
I knew that CAS was working on the feature about 6 months before it's release, I postponed all ideas then.
(To bad, because I had time for it back then)

[Ryoma]

Not working... (wrong STDB file or just wrong name)

STDBRAIN was attached.

The top of windscreen would be cool in this style.

Oups confusion with the Rainbow.

Here the files :
https://mega.nz/folder/N7ACECKD#tg6wDPqar9DG39rt4TqyEg

For the top-windscreen, you mean for the dashboard or the shape ?

[CTG]

I mean the STDA file, roof (e.g. with SUBARU instead of REPSOL).

[Ryoma]

Ok I will take a look tomorrow for this sunshield.

If you find an example, you can shared it here.