The car model on the loading screen

[dreadnaut]

(Split from this other topic)

By the way, what car is the one driving on the DSI logo, in the introduction?

[Overdrijf]

By the way, what car is the one driving on the DSI logo, in the introduction?

It's a separate model in TITLE.P3S, named brav. It looks sort of mildly like a Countach, but not too much.

[Cas]

When I first got Stunts, it was Broderbund 1.0. At that time, 1993, in Argentina, it was impossible to get any original version of any software. All came through piracy. There wasn't any place where you could buy originals and there wasn't any internet either. Often, when you started the games you'd buy at these pirate places, they would show some logo made by the rippers and then you'd press a key and continue to the game. Thus, I don't know if what I got was a faithful copy of the original or if it had any modification of these files. I still have that copy and I can share the replay (v1.0) if you guys wish.

The replay was made with a blue Indy racing on the Default track we all know. Everything would go well until the car got to the loop. At that point, it would get up to 90 degrees and shoot for the sky, finally crashing into the ground. In the foreground, the well known text would flash saying "Professional driver on closed circuit". I remember I found it difficult to believe, considering that phrase, that such replay was the original one.

About the car  in the intro, didn't I read somewhere that the Ferrari F40 had been made based on that car?

[Ryoma]

By the way, what car is the one driving on the DSI logo, in the introduction?

It's a separate model in TITLE.P3S, named brav. It looks sort of mildly like a Countach, but not too much.

A Bugatti EB 110 prototype or Maserati Chubasco

[Daniel3D]

By the way, what car is the one driving on the DSI logo, in the introduction?

It's a separate model in TITLE.P3S, named brav. It looks sort of mildly like a Countach, but not too much.

A Bugatti EB 110 prototype or Maserati Chubasco

Close, but it looks like the back wheels are partly covered by the body..

[Ryoma]

Yes but look the Brav with stressed and you can see this Gandini sign (body covering rear wheel). The rear glass and the air intake are missing too.

[Daniel3D]

I was looking in stressed while you posted, and i agree,
this is pretty close.

It's a good in-game model.
If someone can make the showroom model then we have a base for a new car.

Code Select Expand

The Chubasco - Technical Data and Dimensions.

Engine: Rear engined twin-turbo V 8-cyl @ 90º
Cubic capacity: 3217 cc
Distribution: Four overhead camshafts with 4 valves per cylinder
Power output: 430bhp @ 6500 rpm
Lubrication: Dry sump
Gearbox and clutch: 6-speed and reverse - dry twin-plate plate
Transmission: Rear wheel drive
Wheelbase: 2310mm
Wheel track: Front - 1640mm / Rear - 1660mm
Bodywork: Two-seater
Overall dimensions: Length - 4365 mm / Width - 2014 mm / Height - 1124 mm

[Ryoma]

Yes but the light in front, the rear window and the miss of rear glasses are closes to the EB110 prototype.

Nethertheless, it is a 100% Gandini's car.

I find no picture of the dashboard of the Chubasco.
For the EB 110, dashboard will be more easy to make because the car appears in 2 games : European Racing and Screamer.

I open a new topic here :
http://forum.stunts.hu/index.php?topic=3649.0

[Daniel3D]

Yes but the light in front, the rear window and the miss of rear glasses are closes to the EB110 prototype.

Nethertheless, it is a 100% Gandini's car.

I find no picture of the dashboard of the Chubasco.
For the EB 110, dashboard will be more easy to make because the car appears in 2 games : European Racing and Screamer.

Missing details can be because of low resolution.
They can be added to the showroom model.
I think the Chubasco is a closer resemblance


no good dashboard pictures, but its a start.

[Daniel3D]

By the way, what car is the one driving on the DSI logo, in the introduction?

we are really off-topic here, is it possible to move the posts from dreadnaut's (see above) down to a new topic?
"what car is the one driving on the DSI logo?"
in custom cars??

or do we need to make a new topic there?

attached a quick car of the brav model,
but the scale is wrong, don't know how to fix it.
car0 is way to smal,
car1 is to big
Car2 probably to big.

they are all the same because i just copied them from the title.

[Ryoma]

Thanks. Yeah except to recalculate all the point, I don't know.

Don't laugh, I did it for Grand Prix 2 because I wanted two shapes from two differents files.

[Daniel3D]

I think it can be done in blender, maybe anim8tor.
I'll make time for it later. But I'm afraid that I will lose al paintjobs

[Ryoma]

As I see, car1 is 3x times bigger about.

In other topic, @cas spoke about carworks and a New feature to scale car0 to 2.

Maybe, he can help.

[dreadnaut]

we are really off-topic here, is it possible to move the posts from dreadnaut's (see above) down to a new topic?
"what car is the one driving on the DSI logo?"
in custom cars??

Topic split, then merged with the other. Please wait a moment next time, so we can move existing messages instead of duplicating them.

[Daniel3D]

Topic split, then merged with the other. Please wait a moment next time, so we can move existing messages instead of duplicating them.

Thanks. I was hoping it was possible.
Sorry for the extra work.